Infrared heater IR heating panel 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
Specification:
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
Set contains:
- Infrared heater 430W TRIO
- Holding hook
- Operating instructions
- Manufacturer's packaging
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
The heater provides warmth and thermal comfort in the room. This effect is achieved thanks to the long infrared wavelengths that are created when the carbon fiber is heated. Carbon fiber has a high thermal conductivity, which makes it possible to reduce power consumption and thus save on heating. During operation, the heater does not heat the air itself, but warms the surrounding objects and the human body (improves blood circulation in the body).
The main part of the heater is made of bend- and break-resistant polymer heating film, on which a graphic with a design is applied. The whole is fastened together with wooden slats.
The design of the heater allows it to be rolled up, which, combined with low weight, makes it easy to carry.
Additionally, an on/off switch on the cord allows for easy operation and selection of the power level.
Simple construction and the absence of mechanical parts translate into a long-lasting device.
Specification:
- Total area of the heating element: 0,56 m2
- Mains operating voltage: 230 V / 50 Hz
- Power: 430 W
- 2 power levels - regulator on cord
- Total length of power cord - 150 cm
- Recommended heated area: 10-12 m²
- Nominal current consumption: 1.8 A
- Maximum surface temperature: 75C
- Required time to reach operating temperature: 40-60 seconds
- Operating time: continuous (adjustable by thermostat)
- Safety category of outdoor film: IP20
- Electrical safety category: II
- Dimensions: 100x57 cm
- Mounting: wall mounted
- Two heating levels - controller on the cable
Set contains:
- Infrared heater 430W TRIO
- Holding hook
- Operating instructions
- Manufacturer's packaging
- Innovative flexible panel using infrared technology
- More efficient heating than conventional heaters
- Carbon fiber heating foil
- Heater design resembles a painting
- Can be rolled up
- 2 power levels - regulator on cord
- Quick and easy installation
- Does not dry out the air in the room
- Power: 430 W.
