SATELLITE SPANNA 90 SAT QUAD HD 4K KIT
The satellite dish is ideal for receiving signals from Astra, Hotbird, Amos, Eutelsat, etc.
The mount for the converter is standard (diameter 4 cm), so you can install any modern converter, also suitable for wireless internet. The antenna is characterized by a very stable construction, which enables very good reception parameters.
A good antenna is the basis for good TV reception - without interference and interruptions. You can have a first-class satellite receiver, but if the antenna has a small diameter and poor workmanship, interference will occur, especially on rainy, snowy and windy days.
The MCTV-925 antenna mount is a solid and universal mount for all types of satellite, terrestrial TV and Internet antennas.
Thanks to its manufacture from galvanized steel, the mount is resistant to corrosion and other chemical reactions that occur in the environment.
The quad satellite transducer combines four full-range transducers in one housing. Our model is a high-quality device with a very low noise figure. It masters HD reception without any problems. The converter is attached to the satellite dish in a standard 40 mm bracket.
Our converter is one of the world leaders in terms of performance and workmanship. It is characterized by a low phase noise factor. The QUAD converter enables independent reception of one satellite on 4 receivers.
100m - RG6-U CCS thickness 1.0mm cable core with double shielding guarantees very high electrical parameters and extremely low signal attenuation.
8 pcs - F connector made of nickel-plated metal. It is fully corrosion resistant and can therefore be used for both indoor and outdoor installation.
The absence of corrosion significantly extends the life of the finished connection without the need for cleaning and maintenance. It also reduces the attenuation of the joint.
Specification:
Satellite dish:
- Antenna dimensions: 90 cm
- LNB mount: 40 mm
- Colour: graphite
- Material type: phosphated steel
- Antenna mast:
- Construction material: galvanized steel
- Distance from the wall: 40 cm
- Vertical tube height: 27 cm
- Pipe diameter: Ø 38mm
- Mounting plate: 150x150mm
- Drill holes: 4x 20 x 10mm
- Plastic cap: 1 piece
- HD converter:
- Lower band - input: 10.7 - 11.7 GHz
- Lower band - output: 950 - 1950 MHz
- Lower oscillator: 9.75 GHz
- Upper band input: 11.7 - 12.75 GHz
- Upper band output: 1100 - 2150 MHz
- Upper oscillator: 10.6 GHz
- Gain: 60 dB
- VSWR: 2.5:1 (max)
- Operating temperature: -30/70°C
- Coaxial cable:
- Main conductor: 1.00 CCS
- Impedance: 75 Ohm
- Length: 100 m
- Low attenuation in the entire frequency range of TV/SAT
- Double shielded
- Wide application - antenna systems, AV, CCTV, TV, FM, SAT, DVB-T, DVB-S, DVB-C, monitoring
- Complies with RG6 specification/standard - very universal
- Satellite F-connector 6.80mm with seal:
- Used in SAT systems
- Made of nickel-plated metal
- Corrosion-resistant
- For indoor and outdoor use.
Set contains:
- New canopy 90 cm GRAPHITE
- LNB holder
- Mounting 2 clips on the tube
- Antenna mast
- HD converter
- Antenna cable 100 m
- 8x F-connectors
- 90cm Satellite Dish Maclean
- Satellite Dish Mount 40cm
- Red Point Satellite Quad Converter Maclean
- Satellite Coaxial Cable 1.0CCS RG6 100M
- 8x Satellite F-Connectors
The satellite dish is ideal for receiving signals from Astra, Hotbird, Amos, Eutelsat, etc.
The mount for the converter is standard (diameter 4 cm), so you can install any modern converter, also suitable for wireless internet. The antenna is characterized by a very stable construction, which enables very good reception parameters.
A good antenna is the basis for good TV reception - without interference and interruptions. You can have a first-class satellite receiver, but if the antenna has a small diameter and poor workmanship, interference will occur, especially on rainy, snowy and windy days.
The MCTV-925 antenna mount is a solid and universal mount for all types of satellite, terrestrial TV and Internet antennas.
Thanks to its manufacture from galvanized steel, the mount is resistant to corrosion and other chemical reactions that occur in the environment.
The quad satellite transducer combines four full-range transducers in one housing. Our model is a high-quality device with a very low noise figure. It masters HD reception without any problems. The converter is attached to the satellite dish in a standard 40 mm bracket.
Our converter is one of the world leaders in terms of performance and workmanship. It is characterized by a low phase noise factor. The QUAD converter enables independent reception of one satellite on 4 receivers.
100m - RG6-U CCS thickness 1.0mm cable core with double shielding guarantees very high electrical parameters and extremely low signal attenuation.
8 pcs - F connector made of nickel-plated metal. It is fully corrosion resistant and can therefore be used for both indoor and outdoor installation.
The absence of corrosion significantly extends the life of the finished connection without the need for cleaning and maintenance. It also reduces the attenuation of the joint.
Specification:
Satellite dish:
- Antenna dimensions: 90 cm
- LNB mount: 40 mm
- Colour: graphite
- Material type: phosphated steel
- Antenna mast:
- Construction material: galvanized steel
- Distance from the wall: 40 cm
- Vertical tube height: 27 cm
- Pipe diameter: Ø 38mm
- Mounting plate: 150x150mm
- Drill holes: 4x 20 x 10mm
- Plastic cap: 1 piece
- HD converter:
- Lower band - input: 10.7 - 11.7 GHz
- Lower band - output: 950 - 1950 MHz
- Lower oscillator: 9.75 GHz
- Upper band input: 11.7 - 12.75 GHz
- Upper band output: 1100 - 2150 MHz
- Upper oscillator: 10.6 GHz
- Gain: 60 dB
- VSWR: 2.5:1 (max)
- Operating temperature: -30/70°C
- Coaxial cable:
- Main conductor: 1.00 CCS
- Impedance: 75 Ohm
- Length: 100 m
- Low attenuation in the entire frequency range of TV/SAT
- Double shielded
- Wide application - antenna systems, AV, CCTV, TV, FM, SAT, DVB-T, DVB-S, DVB-C, monitoring
- Complies with RG6 specification/standard - very universal
- Satellite F-connector 6.80mm with seal:
- Used in SAT systems
- Made of nickel-plated metal
- Corrosion-resistant
- For indoor and outdoor use.
Set contains:
- New canopy 90 cm GRAPHITE
- LNB holder
- Mounting 2 clips on the tube
- Antenna mast
- HD converter
- Antenna cable 100 m
- 8x F-connectors
- 90cm Satellite Dish Maclean
- Satellite Dish Mount 40cm
- Red Point Satellite Quad Converter Maclean
- Satellite Coaxial Cable 1.0CCS RG6 100M
- 8x Satellite F-Connectors
