SATELLITE SPANNA 90 SAT QUAD HD 4K KIT
The satellite dish is ideal for receiving signals from Astra, Hotbird, Amos, Eutelsat, etc.
The mount for the converter is standard (diameter 4 cm), so you can install any modern converter, also suitable for wireless internet. The antenna is characterized by a very stable construction, which enables very good reception parameters.
A good antenna is the basis for good TV reception - without interference and interruptions. You can have a first-class satellite receiver, but if the antenna has a small diameter and poor workmanship, interference will occur, especially on rainy, snowy and windy days.
The MCTV-925 antenna mount is a solid and universal mount for all types of satellite, terrestrial TV and Internet antennas.
Thanks to its manufacture from galvanized steel, the mount is resistant to corrosion and other chemical reactions that occur in the environment.
High-quality, universal satellite quad converter with a low noise factor of 0.1 dB.
Enables the connection of four satellite receivers or two SAT receivers with recorder and two independent heads (LNB inputs). Very suitable for multi-room SAT systems (NC+, Cyfrowy Polsat)
100m - RG6-U CCS thickness 1.0mm cable core with double shielding guarantees very high electrical parameters and extremely low signal attenuation.
8 pcs - F connector made of nickel-plated metal. It is fully corrosion resistant and can therefore be used for both indoor and outdoor installation.
The absence of corrosion significantly extends the life of the finished connection without the need for cleaning and maintenance. It also reduces the attenuation of the joint.
Specification:
Satellite dish:
- Antenna dimensions: 90 cm
- LNB mount: 40 mm
- Colour: graphite
- Material type: phosphated steel
- Antenna mast:
- Construction material: galvanized steel
- Wall distance: 40 cm
- Vertical tube height: 27 cm
- Tube diameter: Ø 38mm
- Mounting plate: 150x150mm
- Drill holes: 4x 20 x 10mm
- Plastic cap: 1 piece
- HD converter:
- Full HDTV support: YES
- Input frequencies: 10.7GHz - 12.75GHz
- Polarization: H and V
- Output frequency: 950MHz - 2150MHz
- Noise factor: 0.1dB
- L.O. Generator frequency at GHz: 9.75 GHz for 10.7 - 11.7 GHz and 10.6 GHz for 11.7 - 12.75 GHz
- Gain: 65 dB
- Coaxial cable:
- Main conductor: 1.00 CCS
- Impedance: 75 Ohm
- Length: 100 m
- Low attenuation over the entire TV/SAT frequency range
- Double shielded
- Versatile use - antenna systems, AV, CCTV, TV, FM, SAT, DVB-T, DVB-S, DVB-C, monitoring
- Complies with the RG6 specification/standard - very universal
- Satellite F connector 6.80 mm with seal:
- For SAT systems
- Made of nickel-plated metal
- Corrosion-resistant
- Suitable for indoor and outdoor use.
Set contains:
- 90cm satellite dish
- LNB holder
- Mounting 2 clips on the pipe
- Antenna mast
- HD converter
- Antenna cable 100 m
- 8x F-connectors
- Maclean 90cm satellite dish
- Satellite dish mount 40cm
- Maclean quad satellite converter MCTV-629
- Satellite coaxial cable 1.0CCS RG6 100M
- 8x satellite F-connectors
The satellite dish is ideal for receiving signals from Astra, Hotbird, Amos, Eutelsat, etc.
The mount for the converter is standard (diameter 4 cm), so you can install any modern converter, also suitable for wireless internet. The antenna is characterized by a very stable construction, which enables very good reception parameters.
A good antenna is the basis for good TV reception - without interference and interruptions. You can have a first-class satellite receiver, but if the antenna has a small diameter and poor workmanship, interference will occur, especially on rainy, snowy and windy days.
The MCTV-925 antenna mount is a solid and universal mount for all types of satellite, terrestrial TV and Internet antennas.
Thanks to its manufacture from galvanized steel, the mount is resistant to corrosion and other chemical reactions that occur in the environment.
High-quality, universal satellite quad converter with a low noise factor of 0.1 dB.
Enables the connection of four satellite receivers or two SAT receivers with recorder and two independent heads (LNB inputs). Very suitable for multi-room SAT systems (NC+, Cyfrowy Polsat)
100m - RG6-U CCS thickness 1.0mm cable core with double shielding guarantees very high electrical parameters and extremely low signal attenuation.
8 pcs - F connector made of nickel-plated metal. It is fully corrosion resistant and can therefore be used for both indoor and outdoor installation.
The absence of corrosion significantly extends the life of the finished connection without the need for cleaning and maintenance. It also reduces the attenuation of the joint.
Specification:
Satellite dish:
- Antenna dimensions: 90 cm
- LNB mount: 40 mm
- Colour: graphite
- Material type: phosphated steel
- Antenna mast:
- Construction material: galvanized steel
- Wall distance: 40 cm
- Vertical tube height: 27 cm
- Tube diameter: Ø 38mm
- Mounting plate: 150x150mm
- Drill holes: 4x 20 x 10mm
- Plastic cap: 1 piece
- HD converter:
- Full HDTV support: YES
- Input frequencies: 10.7GHz - 12.75GHz
- Polarization: H and V
- Output frequency: 950MHz - 2150MHz
- Noise factor: 0.1dB
- L.O. Generator frequency at GHz: 9.75 GHz for 10.7 - 11.7 GHz and 10.6 GHz for 11.7 - 12.75 GHz
- Gain: 65 dB
- Coaxial cable:
- Main conductor: 1.00 CCS
- Impedance: 75 Ohm
- Length: 100 m
- Low attenuation over the entire TV/SAT frequency range
- Double shielded
- Versatile use - antenna systems, AV, CCTV, TV, FM, SAT, DVB-T, DVB-S, DVB-C, monitoring
- Complies with the RG6 specification/standard - very universal
- Satellite F connector 6.80 mm with seal:
- For SAT systems
- Made of nickel-plated metal
- Corrosion-resistant
- Suitable for indoor and outdoor use.
Set contains:
- 90cm satellite dish
- LNB holder
- Mounting 2 clips on the pipe
- Antenna mast
- HD converter
- Antenna cable 100 m
- 8x F-connectors
- Maclean 90cm satellite dish
- Satellite dish mount 40cm
- Maclean quad satellite converter MCTV-629
- Satellite coaxial cable 1.0CCS RG6 100M
- 8x satellite F-connectors
