Replacement self-copy remote control for gates universal
High quality brand new remote control from Maclean. The device is addressed to people who have the original remote control and would like to make a spare. It has an elegant durable housing with chrome inserts and a sliding flap.
The remote copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code frequency of 433.92 Mhz.
The remote control should be programmed in the same way as the original remote control:
Erase the memory of the remote control:
- Press and hold button A and B simultaneously - after two seconds, the LED will flash three times.
- Release button B and then quickly press and release it 3 times (button A must be pressed all the time). After a moment, the red diode will start flashing quickly.
- Release both buttons.
- The memory of the remote control has been erased (when any button is pressed, the red diode does not light up).
Copying the signal:
- In order to start copying, the previously stored button codes must be erased from the remote control (see: "Erasing the memory of the remote control").
- Bring both remotes close to each other and press the button you want to copy on them - the diode will blink slowly 3 times and after a while it will start blinking quickly, which means that the button has been copied correctly.
- Repeat the operation with the other remotes' buttons.
- Keep in mind that both remotes must be very close to each other and must have working batteries.
Restore memory:
- Press buttons A and D simultaneously - the diode will blink three times and after a while it will start blinking quickly. This means. that the memory has been correctly restored.
Specification:
- Functions: copy codes, erase codes and restore codes.
- 4 built-in buttons for use
- Very fast and easy to program
- Battery: CR2032
- Packaging: string bag
- The remote copies the signal of most remote controls (for gates, controllers, alarms) with a 433.92 Mhz fixed code.
Set contains:
- Maclean MCE98 remote control
- Manufacturer's packaging
- Functions: copy codes, erase codes and restore codes
- 4 built-in buttons for use.
- Very fast and easy to program
- Packaging: string bag
- Pilot copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code on 433.92 Mhz
High quality brand new remote control from Maclean. The device is addressed to people who have the original remote control and would like to make a spare. It has an elegant durable housing with chrome inserts and a sliding flap.
The remote copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code frequency of 433.92 Mhz.
The remote control should be programmed in the same way as the original remote control:
Erase the memory of the remote control:
- Press and hold button A and B simultaneously - after two seconds, the LED will flash three times.
- Release button B and then quickly press and release it 3 times (button A must be pressed all the time). After a moment, the red diode will start flashing quickly.
- Release both buttons.
- The memory of the remote control has been erased (when any button is pressed, the red diode does not light up).
Copying the signal:
- In order to start copying, the previously stored button codes must be erased from the remote control (see: "Erasing the memory of the remote control").
- Bring both remotes close to each other and press the button you want to copy on them - the diode will blink slowly 3 times and after a while it will start blinking quickly, which means that the button has been copied correctly.
- Repeat the operation with the other remotes' buttons.
- Keep in mind that both remotes must be very close to each other and must have working batteries.
Restore memory:
- Press buttons A and D simultaneously - the diode will blink three times and after a while it will start blinking quickly. This means. that the memory has been correctly restored.
Specification:
- Functions: copy codes, erase codes and restore codes.
- 4 built-in buttons for use
- Very fast and easy to program
- Battery: CR2032
- Packaging: string bag
- The remote copies the signal of most remote controls (for gates, controllers, alarms) with a 433.92 Mhz fixed code.
Set contains:
- Maclean MCE98 remote control
- Manufacturer's packaging
- Functions: copy codes, erase codes and restore codes
- 4 built-in buttons for use.
- Very fast and easy to program
- Packaging: string bag
- Pilot copies the signal of most remote controls (for gates, controllers, alarms) with a fixed code on 433.92 Mhz
