Programmable Remote Control
Programming Instructions:
1-- Clear the factory code:
Press the A button and the B button at the same time, the LED should flash 2 times.
Keep pressing the A button and release the B button, then press the B button 3 times.
The LED will flash quickly confirming that the factory code has been deleted successfully.
2-- Copy code from your original remote:
Take the original remote controller by your left hand, and the duplicating remote controller on the right hand.
Place them head to head or side by side and press the two buttons at the same time (one is from original remote controller, one is from duplicating remote controller ).
After 3 seconds, it will flash then stop. This means the duplicating remote controller's B button has learned the code from the original remote controller button. To program other button, follow the same process.
NOTE: It is essential that you start programming starting from the B button instead of A.
3-- Recover a lost code
When you have copied the code from original remote controller, but accidentally clear it out,you can recover it by press the last two buttons (not the LOCK and UNLOCK button) at the same time. After about three seconds, the LET will flash 3 times. This confirms the lost code has been re-learned.
Specifikace:
Nice-One, Nice-Flors, DiTEC, V2 rolling code compatible
433,92Mhz frequency
4 programmable buttons
Easy to use, reliable and does the job quickly !
CE certified
Warranty: 24 months
High quality, reliable and effective programmable remote in a stylish, sturdy housing.
Nice-One, Nice-Flors, DiTEC, V2 rolling code system compatible.
Simple, reliable, perfect for anyone wanting to configure a new remote for your gate, garage door etc.
Please be aware that this device will not replace the original remote.
Programming Instructions:
1-- Clear the factory code:
Press the A button and the B button at the same time, the LED should flash 2 times.
Keep pressing the A button and release the B button, then press the B button 3 times.
The LED will flash quickly confirming that the factory code has been deleted successfully.
2-- Copy code from your original remote:
Take the original remote controller by your left hand, and the duplicating remote controller on the right hand.
Place them head to head or side by side and press the two buttons at the same time (one is from original remote controller, one is from duplicating remote controller ).
After 3 seconds, it will flash then stop. This means the duplicating remote controller's B button has learned the code from the original remote controller button. To program other button, follow the same process.
NOTE: It is essential that you start programming starting from the B button instead of A.
3-- Recover a lost code
When you have copied the code from original remote controller, but accidentally clear it out,you can recover it by press the last two buttons (not the LOCK and UNLOCK button) at the same time. After about three seconds, the LET will flash 3 times. This confirms the lost code has been re-learned.
Specifikace:
Nice-One, Nice-Flors, DiTEC, V2 rolling code compatible
433,92Mhz frequency
4 programmable buttons
Easy to use, reliable and does the job quickly !
CE certified
Warranty: 24 months
High quality, reliable and effective programmable remote in a stylish, sturdy housing.
Nice-One, Nice-Flors, DiTEC, V2 rolling code system compatible.
Simple, reliable, perfect for anyone wanting to configure a new remote for your gate, garage door etc.
Please be aware that this device will not replace the original remote.
