SATELLITE SPANNA 90 SAT QUAD HD 4K KIT
The satellite dish is ideal for receiving signals from Astra, Hotbird, Amos, Eutelsat, etc.
The mount for the converter is standard (diameter 4 cm), so you can install any modern converter, also suitable for wireless internet. The antenna is characterized by a very stable construction, which enables very good reception parameters.
A good antenna is the basis for good TV reception - without interference and interruptions. You can have a first-class satellite receiver, but if the antenna has a small diameter and poor workmanship, interference will occur, especially on rainy, snowy and windy days.
The MCTV-925 antenna mount is a solid and universal mount for all types of satellite, terrestrial TV and Internet antennas.
Thanks to its manufacture from galvanized steel, the mount is resistant to corrosion and other chemical reactions that occur in the environment.
Quad satellite converter for connecting up to 4 satellite receivers!
New, even better version of the converter with improved design, better performance and a gain of up to 70 dB with a noise figure of 0.1dB
100m - RG6-U CCS
Thick 1.0mm cable core with double shielding ensures very high electrical parameters and extremely low signal attenuation.
8 pcs - nickel-plated metal F-connector. It is fully corrosion resistant and can therefore be used for both indoor and outdoor installation.
The absence of corrosion significantly extends the life of the finished connection without the need for cleaning and maintenance. It also reduces the attenuation of the joint.
Specification:
Satellite dish:
- Antenna dimensions: 90 cm
- LNB mount: 40 mm
- Colour: graphite
- Material type: phosphated steel
- Antenna mast:
- Construction material: galvanized steel
- Distance from the wall: 40 cm
- Vertical tube height: 27 cm
- Tube diameter: Ø 38mm
- Mounting plate: 150x150mm
- Drill holes: 4x 20 x 10mm
- Plastic cap: 1 piece
HD converter:
- Sub-band - input: 10.7 - 11.7 GHz
- Sub-band - output: 950 - 1950 MHz
- L.O. Generator frequency. 9.75 and 10.60
- Upper band - input: 11.7 - 12.75 GHz
- Upper band - output: 1100 - 2150 MHz
- Gain: 70 dB
- Noise factor: 0.1 dB
- Operating temperature: -30/70 °C
- Coaxial cable:
- Main conductor: 1.00 CCS
- Impedance: 75 Ohm
- Length: 100 m
- Low attenuation in the TV/SAT frequency range
- Double shielded
- Versatile use - antenna systems, AV, CCTV, TV, FM, SAT, DVB-T, DVB-S, DVB-C, monitoring
- Complies with the RG6 specification/standard - very universal
- Satellite F connector 6.80mm with seal:
- For SAT systems
- Made of nickel-plated metal
- Corrosion-resistant
- Suitable for indoor and outdoor use.
Set contains:
- 90cm satellite dish
- LNB mount
- Mounting 2 clips on the pipe
- Antenna mast
- HD converter
- Antenna cable 100 m
- 8x F-connectors
- 90cm satellite dish Maclean
- 40cm satellite dish bracket
- Maclean Quad High Gain Satellite Converter
- Satellite coaxial cable 1.0CCS RG6 100M
- 8x satellite F-connectors
The satellite dish is ideal for receiving signals from Astra, Hotbird, Amos, Eutelsat, etc.
The mount for the converter is standard (diameter 4 cm), so you can install any modern converter, also suitable for wireless internet. The antenna is characterized by a very stable construction, which enables very good reception parameters.
A good antenna is the basis for good TV reception - without interference and interruptions. You can have a first-class satellite receiver, but if the antenna has a small diameter and poor workmanship, interference will occur, especially on rainy, snowy and windy days.
The MCTV-925 antenna mount is a solid and universal mount for all types of satellite, terrestrial TV and Internet antennas.
Thanks to its manufacture from galvanized steel, the mount is resistant to corrosion and other chemical reactions that occur in the environment.
Quad satellite converter for connecting up to 4 satellite receivers!
New, even better version of the converter with improved design, better performance and a gain of up to 70 dB with a noise figure of 0.1dB
100m - RG6-U CCS
Thick 1.0mm cable core with double shielding ensures very high electrical parameters and extremely low signal attenuation.
8 pcs - nickel-plated metal F-connector. It is fully corrosion resistant and can therefore be used for both indoor and outdoor installation.
The absence of corrosion significantly extends the life of the finished connection without the need for cleaning and maintenance. It also reduces the attenuation of the joint.
Specification:
Satellite dish:
- Antenna dimensions: 90 cm
- LNB mount: 40 mm
- Colour: graphite
- Material type: phosphated steel
- Antenna mast:
- Construction material: galvanized steel
- Distance from the wall: 40 cm
- Vertical tube height: 27 cm
- Tube diameter: Ø 38mm
- Mounting plate: 150x150mm
- Drill holes: 4x 20 x 10mm
- Plastic cap: 1 piece
HD converter:
- Sub-band - input: 10.7 - 11.7 GHz
- Sub-band - output: 950 - 1950 MHz
- L.O. Generator frequency. 9.75 and 10.60
- Upper band - input: 11.7 - 12.75 GHz
- Upper band - output: 1100 - 2150 MHz
- Gain: 70 dB
- Noise factor: 0.1 dB
- Operating temperature: -30/70 °C
- Coaxial cable:
- Main conductor: 1.00 CCS
- Impedance: 75 Ohm
- Length: 100 m
- Low attenuation in the TV/SAT frequency range
- Double shielded
- Versatile use - antenna systems, AV, CCTV, TV, FM, SAT, DVB-T, DVB-S, DVB-C, monitoring
- Complies with the RG6 specification/standard - very universal
- Satellite F connector 6.80mm with seal:
- For SAT systems
- Made of nickel-plated metal
- Corrosion-resistant
- Suitable for indoor and outdoor use.
Set contains:
- 90cm satellite dish
- LNB mount
- Mounting 2 clips on the pipe
- Antenna mast
- HD converter
- Antenna cable 100 m
- 8x F-connectors
- 90cm satellite dish Maclean
- 40cm satellite dish bracket
- Maclean Quad High Gain Satellite Converter
- Satellite coaxial cable 1.0CCS RG6 100M
- 8x satellite F-connectors